Product Description

Elastic PU adhesive and sealant for a wide range of applications Universal application Outstanding adhesive strength on a wide range of materials and surfaces. Approved for use with foodstuffs (ISEGA certificate) Harmless to health in hardened state Suitable for gluing and sealing in food processing areas Highly elastic Bonding of identical and different substances possible Compensation of different material expansions Absorbs vibrations and sounds Long skin formation time Allows bonding or sealing of complex components Also ideal for large surfaces Assembly components can be repositioned Can be ground/painted Following skin formation, can be mechanically machined and painted over without surface activation (perform preliminary tests to check paint compatibility). Not corrosive Avoids corroding the metal Odourless Silicon-free Notice Do not allow this product to come into contact with alkyd-resin paint systems. Not suitable for glass groove sealing and for expansion joints in the construction sector. Direct sunlight may result in yellowing of the surface. Not suitable for PE, PP, PTFE, silicone, polystyrene and plastics. Minimum adhesive thickness: 3 mm. It is essential to use Adhesion Plus products in order to achieve optimum adhesion results. Proof of Performance ISEGA: Can be used where food is processed or stored, e.g. for bonding wall and floor areas in food processing companies. Clearance certificate no.: 41958 U 16 Application area For a wide range of bonding and sealing work on surface materials such as metal, painted surfaces, wood, stone, concrete and plastic (polyester and hard PVC). Instructions The surfaces must be clean, dry and free from dust and grease. Processing temperature is between +5°C and +35°C. Best adhesive results are guaranteed when the surfaces are pretreated with Activating Cleaner and Primer for Metal or Primer for plastic/wood/stone. Unhardened material can be removed with glue remover, hardened material can only be removed mechanically. A minimum adhesive layer thickness of 3 mm is recommended to harness the benefits of thick-coat bonding.