Product Description
Reinforcement rods - Concrete
Do not apply on: As an anticorrosive finishing product
Appearance: red powder
Duration: Effectiveness of performance characteristics: 12 months in unopened packages, protected from humidity.
2 kg bag: 1.12 m2 per mm of thickness Installation
characteristics
One-component product
Pot life of the mix: 60 min
Waiting time between 1st and 2nd coat: 1-2 hours
The surfaces must be clean and free of crumbly and detaching parts
The irons must be brushed or sandblasted until all traces of rust are eliminated
Mixing the product: Mix 1 kg with 20-22 cl of water (20% 22%).
Application
Apply a first coat of weber.tec fer on the irons, creating a continuous layer of at least 1 mm.
After 1-2 hours apply a second coat for a thickness of about 2 mm. The extension of the treatment to the entire concrete surface to be restored creates a coupling coat for the subsequent recoating with the normal-setting cement-based repair mortar from the weber.tec range, to be applied within the following 2 hours.
Warnings and recommendations
Operating temperature: + 5 ° C to + 35 ° C
Clean tools with water before the product hardens
In case of restoration with weber.tec repairarapido40 or weber.tec repairarapido20 use weber.tec fer only for the treatment of irons and let dry 24 hours.